Login
| Title | Size | Downloads |
|---|---|---|
| 09 High Availability Command Reference-book.pdf | 850.4 KB |
- Table of Contents
- Related Documents
Preface
The H3C S5500-EI & S5500-SI documentation set includes 10 command references, which describe the commands and command syntax options available for the H3C S5500-EI & S5500-SI Switch Series Release 2210.
The High Availability Command Reference describes fault detection and fast failover configuration commands. With these commands, you can detect and diagnose your network, and rapidly recover your network when failures occur.
This preface includes:
· Audience
· About the S5500-EI & S5500-SI documentation set
Audience
This documentation is intended for:
· Network planners
· Field technical support and servicing engineers
· Network administrators working with the S5500-EI & S5500-SI Switch Series
New and changed commands
This section describes by book the new and changed commands in software release 2210 over release 2208 for the S5500-EI and S5500-SI switches.
|
Feature module |
New commands |
Changed commands |
|
· oam loopback interface · undo oam mode |
N/A |
|
|
N/A |
· Default command levels of the commands cfd linktrace and cfd loopback changed to visit, and the commands became available in any view. · Command levels of these commands changed to monitor: display cfd ais, display cfd dm one-way history, display cfd linktrace-reply, display cfd linktrace-reply auto-detection, display cfd ma, display cfd md, display cfd mep, display cfd remote-mep, display cfd service-instance, display cfd status, display cfd tst, reset cfd dm one-way history, and reset cfd tst. |
|
|
DLDP |
N/A |
N/A |
|
N/A |
· S5500-EI only: Value range for the domain-id argument changed to 1 to 24 in the commands display rrpp statistics, display rrpp verbose, domain ring, reset rrpp statistics, and rrpp domain. · Value range for the instance-id-list argument changed to 0 to 128 on the S5500-EI and 0 to 32 on the S5500-SI. |
|
|
port smart-link group track |
Value range for the instance-id-list argument changed to 0 to 128 on the S5500-EI and 0 to 32 on the S5500-SI. |
|
|
N/A |
N/A |
|
|
VRRP (only available on the S5500-EI) |
N/A |
· Option forwarder-switchover member-ip ip-address was added to the vrrp vrid track command. · Option forwarder-switchover member-ip ipv6-address was added to the vrrp ipv6 vrid track command. |
|
Stateful failover (only available on the S5500-EI) |
N/A |
N/A |
|
BFD (only available on the S5500-EI) |
N/A |
Command level of these commands changed to monitor: display bfd debugging-switches, display bfd interface, display bfd session, and reset bfd session statistics. |
|
N/A |
N/A |
Conventions
This section describes the conventions used in this documentation set.
Command conventions
|
Convention |
Description |
|
Boldface |
Bold text represents commands and keywords that you enter literally as shown. |
|
Italic |
Italic text represents arguments that you replace with actual values. |
|
[ ] |
Square brackets enclose syntax choices (keywords or arguments) that are optional. |
|
{ x | y | ... } |
Braces enclose a set of required syntax choices separated by vertical bars, from which you select one. |
|
[ x | y | ... ] |
Square brackets enclose a set of optional syntax choices separated by vertical bars, from which you select one or none. |
|
{ x | y | ... } * |
Asterisk marked braces enclose a set of required syntax choices separated by vertical bars, from which you select at least one. |
|
[ x | y | ... ] * |
Asterisk marked square brackets enclose optional syntax choices separated by vertical bars, from which you select one choice, multiple choices, or none. |
|
&<1-n> |
The argument or keyword and argument combination before the ampersand (&) sign can be entered 1 to n times. |
|
# |
A line that starts with a pound (#) sign is comments. |
GUI conventions
|
Convention |
Description |
|
Boldface |
Window names, button names, field names, and menu items are in Boldface. For example, the New User window appears; click OK. |
|
> |
Multi-level menus are separated by angle brackets. For example, File > Create > Folder. |
Symbols
|
Convention |
Description |
|
|
An alert that calls attention to important information that if not understood or followed can result in personal injury. |
|
|
An alert that calls attention to important information that if not understood or followed can result in data loss, data corruption, or damage to hardware or software. |
|
|
An alert that calls attention to essential information. |
|
NOTE |
An alert that contains additional or supplementary information. |
|
|
An alert that provides helpful information. |
?
?
?TIP
Network topology icons
|
|
Represents a generic network device, such as a router, switch, or firewall. |
|
|
Represents a routing-capable device, such as a router or Layer 3 switch. |
|
|
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features. |
Port numbering in examples
The port numbers in this document are for illustration only and might be unavailable on your device.
About the S5500-EI & S5500-SI documentation set
The H3C S5500-EI & S5500-SI documentation set includes:
|
Documents |
Purposes |
|
Product description and specifications |
|
|
Marketing brochures |
Describe product specifications and benefits. |
|
Technology white papers |
Provide an in-depth description of software features and technologies. |
|
Hardware specifications and installation |
|
|
Compliance and safety manuals CE DOCs |
Provide regulatory information and the safety instructions that must be followed during installation. |
|
Quick starts |
Guides you through initial installation and setup procedures to help you quickly set up your device. |
|
Installation guides |
Provides a complete guide to switch installation and specifications. |
|
PSR150-A [ PSR150-D ] Power Modules User Manual |
Describe the specifications, installation, and replacement of hot swappable 150W power modules. |
|
RPS Ordering Information for H3C Low-End Ethernet Switches |
Helps you order RPSs for switches that can work with an RPS. |
|
User manuals for RPSs |
Describe the specifications, installation, and replacement of RPSs. |
|
User manuals for interface cards |
Describe the specifications, installation, and replacement of expansion interface cards. |
|
H3C Low End Series Ethernet Switches Pluggable Modules Manual |
Describes the specifications of pluggable transceiver modules. |
|
Pluggable SFP[SFP+][XFP] Transceiver Modules Installation Guide |
Describe the installation, and replacement of SFP/SFP+/XFP transceiver modules. |
|
Software configuration |
|
|
Configuration guides |
Describe software features and configuration procedures. |
|
Command references |
Provide a quick reference to all available commands. |
|
Operations and maintenance |
|
|
H3C Series Ethernet Switches Login Password Recovery Manual |
Helps you deal with switch login password loss. |
|
Release notes |
Provide information about the product release, including the version history, hardware and software compatibility matrix, version upgrade information, technical support information, and software upgrading. |
Obtaining documentation
You can access the most up-to-date H3C product documentation on the World Wide Web at http://www.h3c.com.
Click the links on the top navigation bar to obtain different categories of product documentation:
[Technical Support & Documents > Technical Documents] – Provides hardware installation, software upgrading, and software feature configuration and maintenance documentation.
[Products & Solutions] – Provides information about products and technologies, as well as solutions.
[Technical Support & Documents > Software Download] – Provides the documentation released with the software version.
Technical support
http://www.h3c.com
Documentation feedback
You can e-mail your comments about product documentation to [email protected].
We appreciate your comments.
